Jacking up issue

QuBall
Topic Author
Offline
True WM Regular

17 years 4 months ago #11988 by QuBall

Jacking up issue was created by QuBall

Right went to fit the new alloys today but cant even get the trolley jack underneath any sugestions?

Please Log in or Create an account to join the conversation.

Andy
Offline
True WM Regular

17 years 4 months ago #11989 by Andy

Replied by Andy on topic Jacking up issue

get a block of wood (long) drive front wheel up on that and trolley should go under

Please Log in or Create an account to join the conversation.

QuBall
Topic Author
Offline
True WM Regular

17 years 4 months ago #11991 by QuBall

Replied by QuBall on topic Jacking up issue

have a flat back wheel though...

Please Log in or Create an account to join the conversation.

Andy
Offline
True WM Regular

17 years 4 months ago #11992 by Andy

Replied by Andy on topic Jacking up issue

pass on that one good luck

Please Log in or Create an account to join the conversation.

Chris CW
Offline
Owner / Admin

17 years 4 months ago #11993 by Chris CW

Replied by Chris CW on topic Jacking up issue

Juts pump the tyre to give you time to get it onto afew blocks of wood to raise it alittle to start off with, then use the jack. Be careful though, the car will move alot if the tyre goes completely flat again

Please Log in or Create an account to join the conversation.

QuBall
Topic Author
Offline
True WM Regular

17 years 4 months ago #11994 by QuBall

Replied by QuBall on topic Jacking up issue

im going to be a pain dont have no pump either. its not a puncture so it wont go down quick some little git let it down, but we were going to start with jacking the one side up to change the flat one first, then do the other back n etc

Please Log in or Create an account to join the conversation.

Vlad
Offline
True WM Regular

17 years 4 months ago #12003 by Vlad

Replied by Vlad on topic Jacking up issue

just crashed it in to the tree or somethin at about 60-80mph, n wheels shud fall off without u touchin them LMAO

Please Log in or Create an account to join the conversation.

QuBall
Topic Author
Offline
True WM Regular

17 years 4 months ago #12005 by QuBall

Replied by QuBall on topic Jacking up issue

ill pass on that one thanks bob

Please Log in or Create an account to join the conversation.

Turbo Ted
Offline
True WM Regular

17 years 4 months ago #12016 by Turbo Ted

Replied by Turbo Ted on topic Jacking up issue

just put it onto some wood,moving it that timy bit shouldnt hurt it with a flat.

TEAM-P FTW!!!!!

Please Log in or Create an account to join the conversation.

QuBall
Topic Author
Offline
True WM Regular

17 years 4 months ago #12026 by QuBall

Replied by QuBall on topic Jacking up issue

yea thats the option were going for, but next weekend now we need to cut the wood cause its to big, so they shall be on next weekend friday at the earliest now

Please Log in or Create an account to join the conversation.