- Posts: 315
- Thank you received: 0
Alloy wheel machining
- nibnob21
- Topic Author
- Offline
- WM Regular
-
Less
More
14 years 4 months ago #169474
by nibnob21
[url=http://www.warwickshiremodified.co.uk/viewtopic.php?f=20&t=8222:2ok4lqln][color=#FF8000:2ok4lqln][b:2ok4lqln]MY PROJECT THREAD[/b:2ok4lqln][/color:2ok4lqln][/url:2ok4lqln]
Alloy wheel machining was created by nibnob21
Does anyone have any experience with this or know how much it is likely to cost to have the bore of my alloy wheels machined?
My wheels have a centre bore of 57.1mm and they ideally need to be 60.1mm so that I can get some suitable sized spigot rings to fit the Corsa hub of 56.6mm.
Can someone recommend anywhere in the area that offer this service?
Thanks.
My wheels have a centre bore of 57.1mm and they ideally need to be 60.1mm so that I can get some suitable sized spigot rings to fit the Corsa hub of 56.6mm.
Can someone recommend anywhere in the area that offer this service?
Thanks.
[url=http://www.warwickshiremodified.co.uk/viewtopic.php?f=20&t=8222:2ok4lqln][color=#FF8000:2ok4lqln][b:2ok4lqln]MY PROJECT THREAD[/b:2ok4lqln][/color:2ok4lqln][/url:2ok4lqln]
Please Log in or Create an account to join the conversation.