- Posts: 4899
- Thank you received: 0
Catia/PowerMill CNC - Aluminium Numberplate
17 years 3 weeks ago #101310
by dr_hillmann
Catia/PowerMill CNC - Aluminium Numberplate was created by dr_hillmann
been busy last night and today
making a billet aluminium miniture numberplate
little project
should be going on the machine this morning
making a billet aluminium miniture numberplate
little project
should be going on the machine this morning
I might get a rover tuner to tune my gt40 turbo on my left testicle to run 400000 bhp lol
Please Log in or Create an account to join the conversation.
17 years 3 weeks ago #101311
by dr_hillmann
Replied by dr_hillmann on topic Catia/PowerMill CNC - Aluminium Numberplate
designed from catia:
then into powermill pro to design the cnc cutter paths:
then into powermill pro to design the cnc cutter paths:
I might get a rover tuner to tune my gt40 turbo on my left testicle to run 400000 bhp lol
Please Log in or Create an account to join the conversation.
17 years 3 weeks ago #101312
by dr_hillmann
Replied by dr_hillmann on topic Catia/PowerMill CNC - Aluminium Numberplate
I might get a rover tuner to tune my gt40 turbo on my left testicle to run 400000 bhp lol
Please Log in or Create an account to join the conversation.
17 years 3 weeks ago #101322
by MonsterMatt
Replied by MonsterMatt on topic Catia/PowerMill CNC - Aluminium Numberplate
You Gunna Get A Chain For It And Wear It Round Your Neck... Brap?
Please Log in or Create an account to join the conversation.
17 years 3 weeks ago #101325
by dr_hillmann
probs put it on my car for ford fair next year though
Replied by dr_hillmann on topic Catia/PowerMill CNC - Aluminium Numberplate
no cretinMonsterMatt wrote: You Gunna Get A Chain For It And Wear It Round Your Neck... Brap?
probs put it on my car for ford fair next year though
I might get a rover tuner to tune my gt40 turbo on my left testicle to run 400000 bhp lol
Please Log in or Create an account to join the conversation.
17 years 3 weeks ago #101330
by MonsterMatt
Replied by MonsterMatt on topic Catia/PowerMill CNC - Aluminium Numberplate
Pahaha, Why Am I A Cretin?
That'd Look Mint
Can You Not Do A Full Size One, Then It'd Look Bettaaar?
That'd Look Mint
Can You Not Do A Full Size One, Then It'd Look Bettaaar?
Please Log in or Create an account to join the conversation.
17 years 3 weeks ago #101331
by dr_hillmann
Replied by dr_hillmann on topic Catia/PowerMill CNC - Aluminium Numberplate
nah would take too long to machine! and only got a small time slot to do my job in, before we got proper jobs to go on there
and aluminium billet isnt cheap...
and aluminium billet isnt cheap...
I might get a rover tuner to tune my gt40 turbo on my left testicle to run 400000 bhp lol
Please Log in or Create an account to join the conversation.
17 years 3 weeks ago #101333
by dr_hillmann
Replied by dr_hillmann on topic Catia/PowerMill CNC - Aluminium Numberplate
its 23cm wide... so probs only a bit smaller than that one ben_zetecs has on his fez
I might get a rover tuner to tune my gt40 turbo on my left testicle to run 400000 bhp lol
Please Log in or Create an account to join the conversation.
17 years 3 weeks ago #101344
by Bee
Replied by Bee on topic Catia/PowerMill CNC - Aluminium Numberplate
nice one mate
i loved playing around on stuff like that pro destop ftw
i loved playing around on stuff like that pro destop ftw
Please Log in or Create an account to join the conversation.
17 years 3 weeks ago #101349
by dr_hillmann
Replied by dr_hillmann on topic Catia/PowerMill CNC - Aluminium Numberplate
lol pro desktop is gash! catia ftw
and this will actually be getting made this morning! awesome!
and this will actually be getting made this morning! awesome!
I might get a rover tuner to tune my gt40 turbo on my left testicle to run 400000 bhp lol
Please Log in or Create an account to join the conversation.